hot finished seamless tube
"
NICKELlegierungsnahtlose Stahlrohre Legierung C276 ASME SB622 Super
ASME SB622 Alloy C276 super nickel alloy seamless steel tubes Type: Nickel alloy steel pipes Application: Equipment for flue-gas desulfurisation plants, Organic chloride process equipment Technique: Cold-finished, hot-finished Size: OD 5-420mm WT 0.5-50mm LENGTH max12000mm Product Description Chemical Composition: Chemical Requirements C276 Ni Cr Mn Mo C Si Fe Max % Bal. 16.5 1.0 17.0 0.010 0.08 7.0 Min % 14.5 15.0 4.0 Mechanical proporties: C276 Ultimate Tensile Yield
BS 6323-1 LWCF 20 Kaltveredelte Längsschweißrohr aus Edelstahl für Automobil
BS 6323-1 LWCF 20 Cold Finished Longitudinally Welded Stainless Steel Tube For Automobile Introduction BS 6323-1 LWCF 20 is a specification for cold finished longitudinally welded stainless steel tubes specifically designed for use in automobiles. This standard outlines the material requirements, key features, chemical composition, mechanical properties, steel grades, applications, and possible alternative grades for this type of stainless steel tube. Material and Specificati
Nickel ASTM B167 - Chrom - Eisen legiert das hitzebeständige Edelstahl-Rohr
ASTM B167 Nickel-Chromium-Iron Alloys Stainless Tubing , Stainless Steel Tube Stainless Tubing ASTM B167 Nickel-Chromium-Iron Alloys(UNS N06600, N06601,N06690,N06025 and N06045) Seamless Pipe and Tube ASTM B167 Nickel-Chromium-Iron Alloys(UNS N06600, N06601,N06690,N06025 and N06045) Seamless Pipe and Tube In cold-worked annealed, hot-worked annealed, and hot finished seamless pipes and tube for general corrosion resistant and heat resistant application Applications: Steel
Edelstahl-Rohr-Bearbeitungsprodukte TORICH ASTM A269 für Kondensator
Products Description TORICH ASTM A269 Stainless Steel Tube Machining Products For Condenser Standard ASTM A269 Matrial Ferrite TP409/409L TP430,443 Size OD: 6-20mm WT: 0.4-1.5 mm Length: According to Customer's Requirement Manufacture Tubes are made by seamless process. At the manufacturer's option,, tubing may be furnished either hot finished or cold finished. Surface Condition The finished tubes are free of scale., slight amount of oxidation is not considered as scale Test
12000mm rostfreie Duplexzustimmung der nahtloser Stahl-Rohr-ASTM A789 TS16949
ASTM A789 Duplex Stainless S31803 2205 Seamless Steel Tubes Size range: O.D.: 5-203.2mm W.T.:0.5-15mm L: max 12000mm Steel Grade and Chemical Compositions: Steel Grade C ≤ Mn ≤ P ≤ S ≤ Si ≤ Ni Cr Mo N Cu S31803 0.030 2.0 0.030 0.020 1.0 4.50-6.50 21.0-23.0 2.50-3.50 0.08-0.20 - S31500 0.030 1.20-2.00 0.030 0.030 1.40-2.00 4.25-5.25 18.0-19.0 2.50-3.00 0.05-0.1 - S32550 0.040 1.5 0.040 0.030 1.0 4.50-6.50 24.0-27.0 2.90-3.90 0.10-0.25 1.5-2.5 S31200 0.030 2.0 0.045 0.030 1.0 5
Einfacher Enden-Schutz-Edelstahl-nahtloses Rohr mit Standard ASTM A269
ASTM A269 TP304/304L TP316/316L TP310 Seamless Stainless Steel Tube Size range: I.D.≥6.4mm W.T. ≥0.51mm L: according to customer requirement Steel Grade and Chemical Compositions: ASTM / UNS C (max) Si (max) Mn (max) P (max) S (max) Cr Ni Mo Ti TP304 / S30400 0.080 1.00 2.00 0.045 0.03 18.0-20.0 8.0-10.5 TP304L / S30403 0.035 1.00 2.00 0.045 0.03 18.0-20.0 8.0-13.0 TP304H / S30409 0.04-0.10 1.00 2.00 0.045 0.03 18.0-20.0 8.0-11.0 TP316 / S31600 0.080 1.00 2.00 0.045 0.03 16.0
UNS N06625 nahtloses und geschweißtes Stahlnickel-Legierungs-Rohr
UNS N06625 Seamless and welded Nickel Alloy Steel Tube Type: Nickel alloy steel pipes Application: For Seawater components, Flare stacks, Aircraft ducting systems Technique: Cold-finished, hot-finished Size: OD 5-420mm WT 0.5-50mm LENGTH max12000mm Product Description Chemical Composition: Grade (UNS) C Si Mn P S Cr Ni Mo Al Other N06625 0.1 0.50 0.50 0.015 0.015 20.0-23.0 Bal. 8.0-10.0 0.4 Ti≤0.40; Nb:3.15-4.15 Mechanical proporties: Finish Condition Yield Strength (Ksi/Mpa)
HASTELLOY C276 nahtloses und geschweißtes des Nickels des legierten Stahls Rohr
HASTELLOY C276 Seamless and welded nickel alloy steel tube Type: Nickel alloy steel pipes Application: Equipment for flue-gas desulfurisation plants, Organic chloride process equipment Technique: Cold-finished, hot-finished Size: OD 5-420mm WT 0.5-50mm LENGTH max12000mm Product Description Chemical Composition: Chemical Requirements C276 Ni Cr Mn Mo C Si Fe Max % Bal. 16.5 1.0 17.0 0.010 0.08 7.0 Min % 14.5 15.0 4.0 Mechanical proporties: C276 Ultimate Tensile Yield Strength
Nickel-Legierungs-nahtloses Stahlrohr ASME SB163 UNS N08825 für chemische Industrie
ASME SB163 UNS N08825 Nickel Alloy Seamless Steel Tube for chemical industry Type: Nickel alloy steel pipes Application: Chemical process industry, acid production, pickling equipment, pollution control equipment. Technique: Cold-finished, hot-finished Size: OD 5-420mm WT 0.5-50mm LENGTH max12000mm Product Description Chemical Composition: C Si Mn P S Ni Cr Fe Mo Cu Al Ti Min ― ― ― ― ― 38.0 19.5 22.0 2.5 1.5 ― 0.6 Max 0.05 0.5 1.0 ― 0.03 46.0 23.5 ― 3.5 3.0 0.2 1.2 Physical
