low carbon steel pipe
"
Verlegen nahtlose Stahlrohr-Wärmetauscher des Kohlenstoff-Sa192 Stahlrohr-geölte Oberfläche
SA192 Seamless Carbon Tubes for Boilers and Heat-Exchangers Thread Steel Pipes Applications: Seamless Carbon Boiler Tubes Size range: O.D.:5-420mm W.T.:0.5-50mm L: according to customer's requirement (Max12m) Steel Grade and Chemical Compositions: C 0.06-0.18 Mn 0.27-0.63 P ≤0.035 S ≤0.035 Si ≤0.25 Mechanical Properties Tensil Streghth: min ksi[Mpa] 47[325] Yield Point: min ksi[Mpa] 26[180] Elongation: ≥35% Package: 1) Bundle 2) In Bulk 3) Bags 4) As Clients' Requirements
Selbstgasdruckdämpfer-Kohlenstoffstahl-nahtloses Rohr Torich-LÄRM 2391 St37 hochfest
gas spring precision seamless steel pipe DIN2391 Carbon Seamless Steel Pipe Tube German Standard: Chemical Composition Standard Steel Grade C(%) Si(%) Mn(%) S(%) P(%) DIN 2391 St35 ≤0.17 ≤0.35 ≥0.40 ≤0.025 ≤0.025 St37 ≤0.17 ≤0.35 ≥0.40 ≤0.025 ≤0.025 St37.4 ≤0.17 ≤0.35 ≥0.40 ≤0.025 ≤0.025 St45 ≤0.21 ≤0.35 ≥0.40 ≤0.025 ≤0.025 St44 ≤0.21 ≤0.35 ≥0.40 ≤0.025 ≤0.025 St52 ≤0.22 ≤0.35 ≥1.60 ≤0.025 ≤0.025 Mechanical Property: Standard Steel Grade Mechanical Performance GBK(+A) NBK(+N)
Kohlenstoffstahl-Rauchrohre ASTM A556 nahtlose kaltbezogen
ASTM A556 Seamless Cold Drawn Carbon Steel Tube Boiler Tube for Tubular Feed Water Heaters Scope This specification covers minimum-wall-thickness, seamless cold-drawn carbon steel tubes including bending into the form of U-tubes,if specified,for use in tubular feed water heaters. Size : from 5/8 to 1 1/4-in 15.9-31.8mm Outerside diameter,inclusive,with minimum wall thickness equal to or greater than 0.045inch (1.1mm) Order Information: OD: 5/8’’- 1 1/4” (15.9-31.8mm) WT: ≥ 0
EN 10224 L235 Rohre aus nichtlegiertem Stahl ERW Verzinkte Rohre aus legiertem Stahl für den Flüssigkeitstransport
EN 10224 L235 L275 L355A Non-Alloy Steel Tubes ERW Galvanized Alloy Steel Pipe for Liquid Transport Introduction EN 10224 is a European standard that specifies the requirements for non-alloy steel tubes, particularly for use in liquid transport. These tubes are produced using the Electric Resistance Welding (ERW) method and are often galvanized to enhance their corrosion resistance. This article will delve into the material specifications, key features, chemical composition,
Rohr aus Kohlenstoffstahl für Präzisionsmaschinen 30-425 mm OD
Dom Round Tubing Welded Carbon Round Steel Tube for Precision Machinery Material Overview Dom Round Tubing—commonly referred to as DOM (Drawn Over Mandrel)—is produced from electric-resistance-welded (ERW) steel (typically AISI 1020, 1026, or equivalent). It undergoes cold drawing over a mandrel to remove weld flash, enhancing dimensional accuracy, concentricity, strength, and surface quality. It is widely used in precision machinery due to these enhanced characteristics.
Kohlenstoffstahl-Wärmetauscher-Rohr-niedrige Temperatur-Service-Rohrleitung 16MnDG 10MnDG 09DG GB/T 18984
GB/T 18984 Seamless Steel Tubes for Low-Temperature Service Piping Spec: Material:16MnDG , 10MnDG , 09DG Size Range:OD:4-1200mm WT:0.3-200mm General Length:4-12m Tolerance: According to the following tables or customers’ request. Permissible deviation tolerance of OD and WT Classfication Steel size Permissible tolerance W-H OD ＜351 ±1.0%D ≥351 ±1.25%D WT ≤25 ±12.5%S W-C OD ≤30 ±0.20 ＞30~50 ±0.30 ＞50 ±0.75%D WT ≤3 ＋12.5%S -10%S ＞3 ±10%S Steel grade and chemical composition
ASTM A178 ringsum geschweißte Kohlenstoffstahl-Wärmetauscher-Rohre
ASTM A178 Round Welded Carbon Steel Heat Exchanger Tubes Material: Carbon steel and carbon manganese steel Production: Electric Resistance Welding Size range: O.D.: 12.7-127mm W.T.:0.9-9.1mm L: according to customer requirement Applications: For Boilers, Superheaters, Heat-Exchangers, Condensers, Boiler flues, Superheater flues and e ends Heat treatment: After welding, all tubes are heat treated at a temperature of 1650℉ (900℃) or higher and followed by cooling in air or
Kohlenstoffstahl-spezielle Form-Kälte ASTM A500 geschweißte nahtlose gebildet für Struktur
ASTM A500 Cold-Formed Welded and Seamless Carbon Steel Special Shape Tubing for Structure Seamless and Welded Square Steel Tubes Carbon Steel ST37.0,ST44.0, Q235,Q345, SAE1010,SAE1020,SAE1045 Seamless and welded Square steel tubes for application of Structure and scaffolding use Production method: Seamless Cold Drawing ERW Welding Size range: Square tubes O.D. :20-20 to 500-500mm W.T.:1-24mm L:max12000mm Rectangle tubes O.D. :20-30 to 400-600mm W.T.:1-24mm L:max12000mm
Rohr verlegen des nahtlosen Stahl-Sa192 für Kessel und Wärmetauscher Stahlrohre
SA192 Seamless Carbon Tubes for Boilers and Heat-Exchangers Thread Steel Pipes Applications: Seamless Carbon Boiler Tubes Size range: O.D.:5-420mm W.T.:0.5-50mm L: according to customer's requirement (Max12m) Steel Grade and Chemical Compositions: C 0.06-0.18 Mn 0.27-0.63 P ≤0.035 S ≤0.035 Si ≤0.25 Mechanical Properties Tensil Streghth: min ksi[Mpa] 47[325] Yield Point: min ksi[Mpa] 26[180] Elongation: ≥35% Package: 1) Bundle 2) In Bulk 3) Bags 4) As Clients' Requirements
