steel mechanical tubing
"
Nahtloser Stahl-Rohre GB/T 8162 20Mn 25Mn Q235 Q345 zu den strukturellen Zwecken
Seamless Steel Tubes for Structural Purposes GB/T 8162 Spec: Material:10# 20# 45# 20Mn 25Mn Q235 Q345 Size Range: OD:3-1200mm, WT:0.5-200mm, General Length:3-12m Tolerance: According to the following tables or customers’ request. Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Tolerance of the OD &WT: OD Tolerance: Production Method OD Tolerance Hot Rolling(Extrusion) ±1% or ±0.50mm Cold Drawn
GB/T 8163 OD: 4-1200mm nahtloser Stahl-Rohre für Flüssigkeit 10# 20# Q345
Seamless Steel Tubes for Liquid Service GB/T 8163 10# 20# Spec: Material:10# 20# Q295 Q345 st35.8 Size Range:OD:4-1200mm WT:0.3-200mm General Length:3-12.5m Tolerance of the OD &WT: OD Tolerance: Production Method OD Tolerance Hot Rolling(Extrusion) ±1% or ±0.50mm Cold Drawn(Cold Rolled) ±1% or ±0.30mm Tolerance for wall thickness: 1.Wall thickness tolerance of Hot Rolling steel tube: Production Method OD (DN) WT/OD Tolerance Extruded tube ≤102 / ±12.5% or ±0.40mm ＞102 ≤0.05
SUS 304/316 GB/T 3090 nahtloser Stahl-Rohr-Stahlrohr mit kleinem Durchmesser
GB/T 3090 SUS 304/316 ASTM 304/316/321 EN 1.4301/1.4541/1 Austenitic Stainless Small Diameter Seamless Steel Tubes QUALITY CONTROL 1~ Incoming Raw Material Inspection 2~ Raw Material Segregation to avoid steel grade mix-up 3~ Heating and Hammering End for Cold Drawing 4~ Cold Drawing and Cold Rolling, on line inspection 5~ Heat Treatment, +A, +SRA, +LC, +N, Q+T 6~ Straightening-Cutting to specified length-Finished Measuring Inspection 7~ Machanical Testing in own labs with
Elektrischer longitudinalwiderstand elektrischer Widerstand Welde schweißte heißes Bad-galvanisierte Stahlrohre
GB/T 13793 Longitudinal Electric Resistance Welde Longitudinal Electric Resistance Welded Hot Dip Galvanized Steel Tubes Application:Suitable for mechanical, construction and other structural purposes, and the straight seam welded steel pipe with an outer diameter of not more than 711mm, can also be applied to general welded steel pipe for fluid transportation size:L--4~12m OD--5~711mm WT--0.5~5.5mm Grade:10,20,Q195,Q215,Q213,Q275 Manufacture method:The steel pipe shall be
Nahtloser Stahl-Rohre TORICH GB/T 18984 für niedrige Temperatur-Service-Rohrleitung
TORICH GB/T 18984 Seamless Steel Tubes For Low-Temperature-Service Piping Application:For Low-Temperature-Service Piping Material:16MnDG,10MnDG,09DG,09Mn2VDG,06Ni3MoDGUnit:mmHot Roll(Extrusion,Expansion)Steel TubeCold Drawn(Roll) Steel TubeDiamensionToleranceDiamensionToleranceOrdinary Level PAHigh Level PCOrdinary Level PAHigh Level PCNominal Outer DiameterD＜76.1±1.25%D±0.60Nominal Outer DiameterD＜12.7±0.30±0.1076.1~＜139.7±0.8012.7~＜38.1±0.30±0.15139.7~＜273.1±1.5%D±1.2038.1~
Kaltbezogene Präzisions-einzelne geschweißte Stahlrohre GB/T 24187 für Kondensator-Verdampfer
GB/T 24187 Cold-drawn precision single welded steel tubes Application:It is suitable for cold drawn precision single-layer welded steel pipes used in the production of condensers, evaporators, fuel pipes, lubricating oil pipes, electric heat pipes, cooler pipes, and general pipes in refrigeration, automotive, electric heating and other industries. Size:L--1.4-4000m WT--0.3-1.3mm OD--3.18-18mm Plating method for outside plating of steel pipe:Electroplating, electroless plating
Geschweißtes Edelstahl-Rohr-Umkehrbogen-Rohr 008Cr29Mo4 GB/T 30065
Products Description: Welded Stainless Steel Tubes U Bend Tube 008Cr29Mo4 GB/T 30065 Steel Grade/Steel Material: Steel Grade Chemical Composition, % C Mn P S Si Ni Cr Mo Cu N 019Cr25Mo4NiNbTi ≤0.025 ≤1.00 ≤0.030 ≤0.020 ≤0.75 3.50-4.50 24.50-26.00 3.50-4.50 - ≤0.030 022Cr27Mo4Ni2NbTi ≤0.030 ≤1.00 ≤0.030 ≤0.020 ≤1.00 1.00-3.50 25.00-28.00 3.00-4.00 - ≤0.030 008Cr29Mo4 ≤0.010 ≤0.30 ≤0.025 ≤0.020 ≤0.20 ≤0.15 28.00-30.00 3.50-4.20 ≤0.15 ≤0.020 008Cr29Mo4Ni2 ≤0.010 ≤0.30 ≤0.025 ≤0
GB/T 3639 kaltbezogene oder kaltgewalzte Präzisions-nahtlose Stahlrohre für hydraulische Ausrüstung
GB/T 3639 Cold-drawn or Cold-rolled Precision Seamless Steel Tubes for Hydraulic Equipment Products Description: The GB/T 3639 is modified in relation to EN 10305-1: 2002( Steel tubes for precision applications-Technical delivery conditions part 1: Seamless cold drawn tubes).The Cold-drawn or Cold-rolled Precision Seamless Steel Tubes are produced in strict accordance with the Chinese GB/T 3639 standard. Carbon steel pipe billets are used as raw materials, treated with
350mm kaltbezogener Kohlenstoff-nahtloses Stahlrohr für chemische Zusammensetzung
Cold drawn or cold-rolled precision seamless steel tubes Relative standard : GB/T222 permissible tolerance for chemical composition of steel products. GB/T223.5 Steel and iron-Determination of acid-soluble silicon and total silicon content-Reduced molybdosilicate spectro photometric method(GB/T223.5-2008,ISO 4829-1:1986,ISO 4829-2:1988,MOD) Mechanical properties Steel grade 10# 20# 35# 45# Q345B Steel grade deliver conditions +C +LC +SR +A +N Rm/Mpa A/% Rm/Mpa A/% Rm/Mpa ReH
