steel mechanical tubing
"
Edelstahl-Kapillarrohr 6*6mm quadratisches TS16949 ERW 304
304 stainless steel capillary small square tube 6*6mm stainless steel small square precision tube mechanical tube Torich specializes in the production of small diameter stainless steel capillary tube / round tube, square tube, hexagonal tube / seamless tube / fine drawing tube / fine binding tube and other special series products. Product brand: 316L, 304304L, 309, 305, 314, 303, 321, 301, 202, 201 and other materials. The specifications are as follows: Φ( 0.5—10)*(0.1—1)mm.
24mm Wandstärke schweißte Rohr des Rechteck-legierten Stahls ST37.0, ST44.0
Seamless and Welded Rectangle Steel Tubes , Special Steel Pipe Seamless Rectangle Steel Tubes Welded Rectangle Steel Tubes Carbon Steel Stainless Steel Alloy Steel Carbon steel ST37.0,ST44.0, Q235,Q345, SAE1010,SAE1020,SAE1045 For application of structure and mechanical use Size range: Square tubes O.D. :20-20 to 500-500 W.T.:1-24mm L:max12000mm Rectangle tubes O.D. :20-30 to 400-600 W.T.:1-24mm L:max12000m
Nahtloser legierter Stahl-Schläuche 41Cr4 40Cr DIN1.7035 für Gang-Rad/Welle
Alloy Steel Tubes 41Cr4 40Cr DIN1.7035 Seamless Steel Tubes with alloy steel grade 41Cr440CrDIN1.7035 International equivalent: JIS: SCr440 ASTM: 5140 ISO: 41Cr4 41Cr4DIN1.7035: C:0.42 Si:0.25 Mn:0.70 Cr: 1.05 40Cr: C:0.37-0.44 Si:0.17-0.37 Mn:0.50-0.80 Cr:0.80-1.10 Seamless steel tubes with these steel grade could achieve good mechanical properites with quenching and tempering heat treatment (QT), could also heat treatment with annealed. Application: Gear wheel, axle, shaft,
Edelstahl-Rohr des Druckbehälter-nahtloses Duplex-2507
TORICH Supplier Stainless Steel Seamless Duplex Tube Material:329J3L 1.4462 Mechanical Property No. Unified digital code Steel Grade Recommended heat treatment system Tensile property Hardness Tensile strength Rm/(N/mm2) Non proportional extension strength Rp0.2/(N/mm2) Elongation HBW HRC ≥ ≤ 1 S21953 022Cr19Ni5Mo3Si2N 980℃~1040℃ Rapid cooling 630 440 30 290 30 2 S22253 022Cr22Ni5Mo3N 1020℃~1100℃ Rapid cooling 620 450 25 290 30 3 S22053 022Cr23Ni5Mo3N 1020℃~1100℃ Rapid
Legierter Stahl-Rohr Incoloy 800 Inconel 600 GB/T 30059 nahtlos für Wärmetauscher
Products Description: Seamless Corrosion-resisting Alloy Tubes GB/T 30059 Incoloy 800 Inconel 600 For Heat-exchanger Steel Grade/Steel Material: Steel Grade ASTM Steel Grade C Cr Ni Fe Mo Cu Al Ti Nb Co Si Mn P S NS1101 N08800 (Incoloy 800) ≤0.010 19.0-23.0 30.0-35.0 Remainder - ≤0.75 0.15-0.60 0.15-0.60 - - ≤1.00 ≤1.50 ≤0.030 ≤0.015 NS1102 N08810 (Incoloy 800H) 0.05-0.10 19.0-23.0 30.0-35.0 Remainder - ≤0.75 0.15-0.60 0.15-0.60 - - ≤1.00 ≤1.50 ≤0.030 ≤0.015 NS1103 - ≤0.030
20G Nahtlose Omega-Röhrchen aus nichtlegiertem Stahl für den Hochdruckkesseldienst mit Kaltzug
Nahtlose 20G-Omega-Rohre in Kesselqualität für Hochdruckanwendungen. Kaltgezogen für präzise Abmessungen, zertifiziert nach GB/T 5310 (vergleichbar mit ASTM A192/A210). Kundenspezifische Längen von 1–12 m mit engen Toleranzen. Gebaut für Wärmeübertragungseffizienz und Druckintegrität.
JIS G3466 Standard-Karbonstahl-Quadratstahlrohr mit STKR400 und STKR490 in 20 × 20 mm bis 350 × 350 mm Graden
JIS G3466 Carbon Steel Square Steel Tube For General Structural Purposes Product Overview JIS G3466 carbon steel square steel tube is a cold-formed or formed structural hollow section used for general civil engineering, architectural, and fabricated steel structures. Under JIS G3466, the standard grade symbols are STKR400 and STKR490; STKR400 is selected for general structural frames, while STKR490 is used when higher yield and tensile strength are required. The tube is
Rostfreies geschweißtes Stahlrohr ferritisch/Austenit für allgemeine Korrosions-Service
ASTM A790 Ferritic or Austenitic Stainless Steel Welded Tubes or Seamless tubes for general corrosion service Size range: O.D.: 4.0-230mm W.T.:1-30mm L: according to customer requirement Material and Manufacture: S31200, S31260, S31500, S31803, S32003, S32101, S32202,S32205, S32304, S32506, S32520... Tubes are made from Flat-rolled steel by automatic welding process. Subsequent to welding and prior to final heat treatment, the tubes are cold drawn or cold rolled Duplex
GB/T 13912-2002 Nahtlose Rohre
Products Description TORICH GB/T 13912-2002 Seamless and Welded Hot Dip Galvanized Steel Machining Tube for Bush Arm Standard GB/T 13912-2002 Size OD: 30-400mm WT: 0.5-20mm, Length : 1000mm-12000mm Material Q195, Q215, Q235 etc Carbon Steel Surface Hot Dip Galvanized Coatings Application For Bush Arm etc machining products Test Tension Test, Flaring Test, Flange Test, Reverse Test, Hardness Test, Hydrostatic or Nondestructive Electric Test etc QUALITY CONTROL: 1. Incoming Raw
