Rohr des nahtlosen Stahls

GOST 8731 10Г2 20X 30XCA 15XM 30XMA Seamless Steel Tube Seamless Hot-Rolled Steel Pipes For General Purpose Material The GOST 8731 standard specifies the requirements for seamless hot-rolled steel pipes used for general purposes. These pipes are manufactured from high-quality carbon steel, ensuring durability and reliability in various applications. Specification The seamless steel tubes and pipes under GOST 8731 are designed to meet specific dimensional and mechanical

EN 10208-1 L210GA L235GA L245GA 1290GA L360GA Alloy Steel Pipe Hot Rolling Seamless Steel Pipe For Combustible Fluids Introduction The EN 10208-1 standard specifies the requirements for hot rolling seamless steel pipes made of alloy steel. These pipes are specifically designed for use with combustible fluids. The standard covers various grades of alloy steel pipes, including L210GA, L235GA, L245GA, 1290GA, and L360GA. This article will provide an overview of the material,

GB/T5312 Carbon And Carbon-Manganese Seamless Steel Tubes For Ship Seamless Steel TubesSteel Grade/Steel Material:10#20#45#16Mn A106 Gr A,B,A53 Gr B,ASTM A179,A315B,A335 P11,A335 P22, 12CrMo 15CrMo 20CrMo 42CrMo 12Cr1Mov 10CrMo 910A 355P 22 STF A25Steel pipe standard:1. ASTM:ASTM A106GR.A; ASTM A106GR.B; ASTM A53GR.A; ASTM A53GR.B; ASTM A333; ASTM A334; ASTM A192; ASTM A210;2. JIS: G3452;G3457; G3454; G3456; G3461; G3454; G3455; STPG38; STPG38; STS38; STPT42; STB42; STS42;

ISO683-17 Cold Drawn Seamless Steel Tube Bearing Steel Pipe GCr15 100Cr6 from TORICH Products Description: ISO683-17 Cold Drawn Seamless Tube Bearing Steel Pipe GCr15 100Cr6 Steel Grade/Steel Material: Steel Grade mass fraction % C Si Mn P S Cr Mo GCr15 0.95-1.05 0.15-0.35 0.20-0.40 ≤0.027 ≤0.020 1.30-1.65 ≤0.10 100Cr6 0.93-1.05 0.15-0.35 0.25-0.45 ≤0.025 ≤0.015 1.35-1.60 ≤0.10 100CrMnSi6-4 0.93-1.05 0.45-0.75 1.00-1.20 ≤0.025 ≤0.015 1.40-1.65 ≤0.10 100CrMnSi6-6 0.93-1.05 0

Precision Seamless Cold Drawn Hydraulic Cylinder Steel Tubes EN10305-1 E235 E355 +Cc +LCc +SR +Ad +N NBK Standard: EN10305-1 Seamless Cold Drawn/Rolling Steel Tubes Steel tubes for precision applications. Technical delivery conditions. Applications: Telescopic Cylinders/Hydraulic Cylinders/Auto shock absorber innder cylinder Size range: O.D.:6-350mm W.T.:1-35mm L:max12000mm Standard Steel Grade C Si Mn P S EN 10305-1 E215 ≤0.10 ≤0.05 ≤0.70 ≤0.025 ≤0.025 E235 ≤0.17 ≤0.35 ≤1.20

4130 Carbon Steel Seamless Pipe Size: OD: 13.7 – 711mm. Wall Thickness: 1.0 – 40mm. Length: 3-12m or according to clients` requirements. Standard : ASTM A53,BS1387-85,GB/T3091-08,JIS-G3444 Usage: Used For Structure, Accessorize And Construction Ends 1) Plain 2) Beveled 3) Thread End protector 1) Plastic pipe cap 2) Iron protector Coatings PE; 3PE; FBE; black varnish; anti rust oiled; beveled or plain ends; plastic end caps Technique Hot rolled/cold rolled Test inspections

Cold drawn or cold-rolled precision seamless steel tubes Relative standard : GB/T222 permissible tolerance for chemical composition of steel products. GB/T223.5 Steel and iron-Determination of acid-soluble silicon and total silicon content-Reduced molybdosilicate spectro photometric method(GB/T223.5-2008,ISO 4829-1:1986,ISO 4829-2:1988,MOD) Mechanical properties Steel grade 10# 20# 35# 45# Q345B Steel grade deliver conditions +C +LC +SR +A +N Rm/Mpa A/% Rm/Mpa A/% Rm/Mpa ReH

Seamless Steel Tubes and Pipes for High Pressure Boiler GB 5310 Spec: Material:20G 20MnG 25MnG Size Range:OD:4-1200mm WT:0.3-200mm General Length:4-12.5m Tolerance: According to the following tables or customers’ request. Producing method Size Tolerance General High grade Hot rolling (extrude) D 54~325 S≤35 ±0.75% ±0.5% S>35 ±1% ±0.75% >325 ±1% ±0.75% S ≤4.0 ±0.45 ±0.35 >4.0~20 ±12.5%-10% ±10% >20 D25.4~40 ±0.20 _ >40~50 ±0.25 _ >50~60 ±0.30 _ >60 ±0.5% _ S ≤3.0 ±0.3 ±0.2 &g

GB 3087 Seamless Steel Tubes for Low and Medium Pressure Boiler Characteristic: Good concentricity Good surface quality Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Spec: Material:10# 20# STB33/42 st35.8 Size Range:OD:4-1200mm WT:0.3-200mm General Length:4-12.5m Tolerance: According to the following tables or customers’ request. Tolerance of the OD &WT: OD Tolerance: Production Method OD Tolerance Hot Rolling(Extrusion) ±1%