carbon steel tube
"
Kohlenstoffstahl-Rohre en 10217-4 195TR1 P235TR1 P265TR1 geschweißte zu den Druck-Zwecken
EN10217-4 Welded Steel Tubes for Pressure Purposes EN10217-4 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties Material: Fully killed steel, Fine grain steel with a ferritic grain size. Steel Names: In accordance with EN10027-1 and CR10260 Manufacture: HFW High frequency welded SAW Submerged arc welded - longiditudinal seam - SAWH - helical seam - SAWL Welding
Stahl-warm gewalztes Stahlrohr 40Mn2 20Cr 40Cr 15CrMo legierterkohlenstoffstahl-/
Hot rolled for structural purpose Seamless steel tubes as per GB/T 8162 Torich produced by Hot rolled with carbon and alloy steel,Like 10,20,20Mn,25Mn,20Cr,40Cr 15CrMo 45Mn2 etc. as per standard GB/T 8162 applying in Mechanical contructure and general purpose of structure. Detail spec: Size range: OD 76-700mm WT 6-50mm L:3-12.5m Material:Carbon steel:10,20,45,25Mn,Q295,Q345,40Mn2,20Cr,40Cr,15CrMo etc. Alloy steel:40Mn2,20Cr,40Cr,15CrMo etc If not specificate from customer ,We
Kohlenstoff - Mangan-Stahl-nahtloser Stahl-Rohre/Rohre für Schiff GB/T 5312
Carbon and Carbon-Manganese Steel Seamless Steel Tubes and Pipes for Ship GB/T 5312 Spec: Material:320/360/410/460/490 Size Range:OD:4-1200mm WT:0.3-200mm General Length:3-12m Tolerance: According to the following tables or customers’ request. Production Method Size(mm) Tolerance Hot Rolling(Extrusion) OD ≤159 ±1.0%(min.±0.50mm) >159 ±1.25% WT ≤20 +15%(min.+0.45mm) -10%(min. -0.30mm) >20 ±10% D≥351 ±15% Cold Drawn OD ≤30 ±0.20mm 30~50 ±0.30mm >50 ±0.8% WT 1.5~3 +12.5% -10% >3
Kohlenstoffstahl-nahtloses Rohr Astm A334 Gr6, nahtloses Rohr SS für niedriges Temperature
Products Description: Seamless Carbon and Alloy Steel Tube ASTM A334 Gr6 for Low-Temperature Service Material: Element Compision, % Gr1 Gr3 Gr6 Gr7 Gr8 Gr9 Gr11 C, max 0.30 0.19 0.30 0.19 0.13 0.20 0.10 Mn 0.40-1.06 0.31-0.64 0.29-1.06 0.90 max 0.90 max 0.40-1.06 0.60 max P, max 0.025 0.025 0.025 0.025 0.025 0.025 0.025 S, max 0.025 0.025 0.025 0.025 0.025 0.025 0.025 Si - 0.18-0.37 0.10 min 0.13-0.32 0.13-0.32 - 0.35 max Ni - 3.18-3.82 - 2.03-2.57 8.40-9.60 1.60-2.24 35.0-37
Erw-Kohlenstoffstahl-Wärmetauscher-Rohr-Kondensator leitet Astm A214 Sa214
ASTM A214 SA214 ERW Carbon Steel Heat-Exchanger Tubes Condenser Pipes Size range: O.D.:6-76.mm W.T.:0.9-19.0mm L: according to customer requirement Manufacture: Tubes are made by electric-resistance welding. Steel Grade and Chemical Compositions: C 0.18 Mn 0.27 to 0.63 P ≤0.035 S ≤0.035 Hardness Requirements: The tubes shall have a hardness number not exceeding 72HRB. Surface Condition: The finished tubes are free of scale., slight amount of oxidation is not considered as
Speisewasser-Heizungs-nahtloses kaltbezogenes Stahlrohr Astm A556 Od 6 - 1000mm
ASTM A556 Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes Size: Outer Diameter: 6-1000 mm,Wall Thickness: 1- 80 mm,Length :1-12m or as your request Application:Manufacture of Feedwater Heater Material:10#.20#.16Mn.A106(B,C).ST35-ST52 Manufacture :Tubes shall be made by the seamlessprocess and shall be cold drawn. Heat Treatment: 1)Cold-drawn tubes shall be heat treated after the finalcold-draw pass at a temperature of 1 200F [640C] or higher toensure ductility satis
Kalte fertige/heiße bearbeitete Kohlenstoffstahl-Stange Astm A29 1010 1020 5.5mm - 500mm
ASTM A29 1010 1020 Cold Finished and Hot Wrought Carbon Steel Bars Hot- Wrought Steel Bars Steel bars produced by hotforming ingots, blooms, billets, or other semifinished forms toyield straight lengths (or coils,. depending upon size. section,.and mill equipment) in sections that are uniform throughouttheir length. and in the following sections and sizes: 1) Rounds, 732 to 10.0 in. [5.5 to 250 mm]. inclusive.31.1.2 Squares, 7/32 to 6.0 in. [6 to 160 mm]. inclusive. 2)Round
Bronzierter Stahlschläuche Torich Astm A254 Standardkupfer für allgemeine Technik
Products Description TORICH ASTM A254 Copper Brazed Steel Tubing for general engineering uses Product Name Copper Brazed Steel Tubing for general engineering uses Standard ASTM A254, A370, E30, E59 Techinique Copper Brazed Type Single-Strip Type, Double-Strip Type Test Expansion Test, Bend Test, Pressure Proof Tests, Flare Test End Finish Finished tubing shall have smooth ends free of burrs Application automotive, refrigeration, stove industries for fuellines, brakelines,
Kohlenstoffarme nahtloser Stahl-Rohr-großer Durchmesser-geölte Oberfläche für Installationen
Large Diameter Cold Rolled Seamless Low Carbon Steel Pipe for Fittings Application:Applicable to -45 °C grade ~-100 °C level cryogenic pressure vessel pipe and low temperature heat exchanger pipe seamless steel Size:L--4-12m OD--30-351mm WT--3-25mm Manufacture method:Steel should be smelted with oxygen converter or electric furnace and added outside the furnace Delivery Condition:Normal delivery Processing methods:Hot rolled (expanding) steel pipe--WH cold drawing (rolling)
