seamless alloy steel pipe
"
Kaltbezogenes nahtloses Stahlrohr JIS G3452 Kohlenstoff-10.5mm
JIS G 3452 Carbon steel pipes for ordinary piping JIS G3452 Carbon Steel Pipes for Ordinary Piping specifies the carbon steel pipe, hereinafter referred to as the "pipes", used for the pipings for conveying steam, water, oil, gas, air, etc. at comparatively low working pressure. CHEMICAL COMPOSITION unit (%) Steel grade P S SGP 0.040max 0.040max Note: Special steel grade is also available, according to customer request. MECHANICAL PROPERTIES Steel grade Tensile strength Mpa
Kupfer beschichtete nahtloses niedriges Rippenrohr 8mm Ods
Copper Coated Seamless Low Finned Tube PRODUCT DESCRIPTION: Keyword: Copper Low Fin Tube Material: C10200, C11000 Etc Fin Thickness: 0.1mm - 2mm Tube OD: 8mm - 55mm Length: max 12m Application: For Boiler And Heat Exchanger End Protector: Plain End / Beveled End Surface: Copper Coated Test and Inspection: Tension Test, Flaring Test, Flange Test, Reverse Test, Hardness Test, Hydrostatic or Nondestructive Electric Test etc QUALITY CONTROL: Incoming Raw Material Inspection Raw
Kohlenstoff-Mangan ASTM A178/A178M schweißte Stahlrohr für Kessel/Überhitzer
ASTM A178/ A178M Carbon Manganese Welded Steel Tube For Boiler / Superheater Applications: for Boilers,Superheaters, Heat-Exchangers, Condensers, Boiler flues, superheater flues and e ends Material: Carbon Steel and carbon manganese steel Production: Electric Resistance Welding Size range: O.D.:6-127mm W.T.:0.9-9.1mm L: according to customer requirement Steel Grade and Chemical Compositions: Element Grade A, Low-Carbon Steel Grade C, Medium-Carbon Steel Grade D, Carbon
JIS G 3445 STKM 11A Nahtlose CS-Rohre für mechanische Strukturen
JIS G 3445 STKM 11A Seamless CS pipes OD13mm x WT3.2mm,OD 8mm x ID5.1mm for Hyundai, Maruthi, Nissan, Caterpiller etc 1. Standard: JIS G3445 Standard STKM 11A high precision seamless steel tube 2. Steel Grade: STKM11A STKM12A STKM12B STKM12C STKM13A STKM13B STKM13C STKM14A STKM14B STKM14C STKM15A STKM15C STKM16A STKM16C STKM17A STKM17C STKM18A STKM18B STKM18C STKM19A STKM19C STKM20A 3. Production method: Cold drawing on the seamless steel tubes, to reach high accuracy on the
Dick 2-30mm DIN2391 EN10305 ASTM A519 kaltbezogene nahtlose Präzisions-hydraulisches Stahlrohr
Thick 2-30mm DIN2391 EN10305 ASTM A519 Cold Drawn Seamless Precision Hydraulic Steel Tube TORICH is specialized in manufacturing and exporting of seamless and welded precision steel pipes. In view of cold-drawn precision seamless steel pipe used for mechanical structure and hydraulic equipment, these pipes must be manufatured with high dimensional precision and goosurface finish, which is the strength of TORICH. Size range: O.D.:30-250mm W.T.:2-30mm L:max12000mm or as your
Schwarze Phosphatpräzisions-Stahlrohr E215 E235 E355
Black Phosphate Precision Steel Tube E215 E235 E355 TORICH is a professional steel tubes supplier from China with over 23 years manufacturing and exporting experience. Our main products are seamless precision pipe,carbon steel seamless precision pipe,alloy steel seamless precision pipe, stainless steel seamless precision pipe. The material we usually use for producing Black Phosphate Precision Steel Tube E215 E235 E355is10#,20#,1010,1020,1026,ST37,ST44,E235,E215,E355 Product
Nickel-Legierungs-Rohr WT1.5mm ASTM B407 für Wärmetauscher
ASTM B407 Nickel Alloy Tube for Heat Exchanger Application: 1) Evaporation tank, acid and alkali industrial machine in petrochemical production, catalytic regenerator,heat exchanger. 2) The production and use of corrosive alkali metals, especially in environments where sulfides are used, 3) Jet engine components, supplemental components of turbojet engines, etc. Inconel 600 alloy is ni - cr - iron base alloy solid solution strengthening, has good resistance to high temperatur
Nahtloses niedriges geripptes kupfernes überzogenes Stahlrohr C11000 2mm
Seamless Copper Coated Steel Tube Low Finned Tube PRODUCT DESCRIPTION: Keyword: Copper Low Fin Tube Material: C10200, C11000 Etc Fin Thickness: 0.1mm - 2mm Tube OD: 8mm - 55mm Length: max 12m Application: For Boiler And Heat Exchanger End Protector: Plain End / Beveled End Surface: Copper Coated Test and Inspection: Tension Test, Flaring Test, Flange Test, Reverse Test, Hardness Test, Hydrostatic or Nondestructive Electric Test etc QUALITY CONTROL: Incoming Raw Material
4mm Stärke-nahtloses getempertes Edelstahl-Rohr
TORICH DIN2462 304L Custom Stainless Steel Tube 133x4x4113mm for Sputtering Target Quick Details: Standard DIN2462 Grade 304L Specification 133*4*4113mm Tolerance of OD 132.8-133.5mm Tolerance of ID 124.5-125.2mm Tolerance of Length -0/+5mm Ellipticity Roundness deviation≤0.10mm Straightness deviation Overall length direction≤0.5mm Special requirements: 1. Quality requirements: Tolerance of OD:132.8-133.5mm Tolerance of ID:124.5-125.2mm Tolerance of Length:-0/+5mm Ellipticity
