cold drawn steel pipe
"
Kondensator-/Wärmetauscher-Nickel-Legierungs-Schläuche mit hohen Antioxidanseigenschaften
TORICH ASTM B163 Seamless Nickel and Nickel Alloy Condenser and Heat-exchanger Tuebs Standard: ASTM B163 Size Range: OD: 76.2mm and under, WT: Average wall thicknesses of 4.19mm and under Steel Grade: UNS N02200, UNS N02201, UNS N04400, UNS N06025, UNS N06045, UNS N06600, UNS N06601, UNS N06603, UNS N06686, UNS N06690, UNS N08120, UNS N08800, UNS N08801, UNS N08810, UNS N08811, UNS N08825 Permissible Variations in OD and WT : Material Norminal OD, in.(mm) OD, in.(mm) WT, % +
Der Legierungs-Cr-MO Austenit nahtloses hydraulisches Rohr Edelstahl-des Rohr-ASTM A269
ASTM A269 4*0.5 Cr-Mo Alloy Austenitic Seamless Stainless Steel Tube Hydraulic Pipe Material: 2205 304, 304l , Tp304L, 304H , 316, Tp316L, 316L , 316H 316Ti , 317L, 309S, 310S, TP310S ,310 , 310H , 310L , 347, 904L, 321,321H etc AISI /ASTM: Austenitic: 201, 202, 301, 303, 304, 304L, 309S, 310 , 310h , 310l ,310S, 314, 316, 316TI, 316L, 317, 317L , 321, 347, 347H, 904L ,Uranus 65 Duplex:2205, 2304, 2507, 255 , 253MA , 254SMO Ferritic ;409, 409L , 430,436 , 434, 439 , 441 , 443
Rundes SS nahtloses Rohr des Wärmetauscher-/industrielle Edelstahl-Rauchrohre
TORICH SS304 SUS304 316 316L Stb340 13CrMo44 Heat Exchanger Fin Pipe Round Industrial Seamless Stainless Steel Boiler Tube OD:6-127mm WT:0.5-12mm Grade: 304 316 317 etc Seamless stainless Steel pipe coil Coiled heat exchanger Tube SUS304 / 304L / 316L Mechanical Properties: Material Mechanical Properties Tensile Strength ≥ MPa yield strength ≥ MPa Elongation ≥ % T12 415 220 30 TP304 515 205 35 TP304L 458 170 35 TP316 515 205 35 TP316L 485 170 35 TP317 515 205 35 TP317L 515
A500 Kohlenstoffstahl-Quadratrohr Hochfester Kohlenstoffstahl-Strukturrohr für Baukonstruktionen
A500 Carbon Steel Square Tube: High Strength Carbon Steel Structural Tubing for Building Structure Material A500 carbon steel carbon steel structural square tube is made of square hollow section steel tube by cold forming process. This material has high strength and excellent mechanical properties. It is very durable and mostly used in the structural field. The carbon used in A500 tubes strikes a balance between strength and ductility, which makes them perform well in
Rohr Od 3-500mm GB/T24593 12Cr18Ni9 06Cr18Ni11Ti Edelstahl-304/316Welded
Product Name: GB/T24593 12Cr18Ni9 06Cr18Ni11Ti 304/316Welded austenitic boiler and heat-exchanger Stainless Steel Pipes Size range: O.D.:3-500mm W.T.:0.5-50mm L:2000-12000mm according to customers' actual application and production. Application : For boiler and heat-exchanger Steel Grade: 12Cr18Ni9,06Cr19Ni10,022Cr19Ni10,06Cr25Ni20,022Cr22Ni5Mo3N,019Cr19Mo2NbTi,06Cr13Al Characteristic: Good concentricity Good surface quality Good OD and ID tolerance High Precision Stable
Nahtlose Kohlenstoffstahl-Kessel-Wärmetauscher-Rohre JIS G3463
JIS G3463 Carbon Steel Tubes for Boiler and Heat Exchanger JIS G3463 specifies the stainless steel tubes used for exchanging heat on the inside and outside of the tube, it has similar application as JIS G3461 and JIS G3462, while it has better corrosion resistant ability suitable for chemical and petroleum industries. However, it is not applicable to the heating furnace tube. Tube and pipe products of this specification covers more than 10 steel grades from SUS304TB to SUS
Maximaler nahtloser Flussstahl-Schläuche 24000mm Längen-JIS G3465
JIS G3465 Seamless Mild Steel Tubing Standards: JIS G3465 Grade: STM-C 540, STM-C 640, STM-R 590, STM-R 690,STM-R 780,STM-R830 Outer Dimensions: 6mm ~ 350mm Wall Thickness: 0.8mm ~ 35mm Length: max 24000mm Application: Steel pipes for low temperature service Packing: Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation,
Einfache/abgeschrägte Nickel-legierter Stahl-Rohre des Enden-UNS N06601
UNS N06601 Nickel Alloy Steel Tubes Inconel 601 nickel-chromium-iron alloy is a general-purpose engineering material for applications that require resistance to heat and corrosion. The outstanding characteristic of Inconel 601 is its resistance to high-temperature oxidation. The alloy also has good resistance to aqueous corrosion, has high mechanical strength, and is readily formed, machined, and welded. The limiting chemical composition of Inconel 601 is listed in Table 1.
Nickel-legierter Stahl-Schläuche 2-12m Länge Inconel 600
Inconel 600 Nickel Alloy Steel Tubing Inconel Alloy 600 tubing is made from a non-magnetic, nickel-chromium alloy known for its good oxidation resistance at high temperatures. In fact, Inconel® Alloy 600 (UNS N06600) was designed for use from cryogenic to elevated temperatures up to and surpassing 2000 degrees F. Inconel® Alloy 600 tubing possesses great mechanical properties, a good combination of high strength with good workability, and is weldable without difficulty.
